Door Handle Replacement
Door handles seem like something minor however, if you don't like the appearance of the handles or find them difficult to use and use, you should consider replacing them. Installing a new door handle is simple if you've got patience.
Modern door handles are often equipped with cover plates that hide the screws, giving them a more attractive appearance. If your new handle does not already have them attached, you will have to attach them separately.
Removing the old Handle
The door handle isn't just a decorative feature for your home, but it's also an important safety feature that lets you to lock and unlock your door. But, over time the door handle could lose its grip, become loose, or appear old and worn out. This is a sign that it's time to replace the door handle.
One of the first signs that your door handle needs replacing is the fact that it is becoming difficult to operate. This is a serious problem as you will no longer be in a position to lock or unlock the door which could put your family and yourself at risk.
It is also a good idea to replace your door handle if it is damaged or broken. A damaged or broken door handle can be dangerous, especially for elderly and children members who may struggle to open it. They could become trapped. Fortunately, it's fairly easy to fix a broken door handle by replacing the handle that was broken.
Modern door handles are usually standard sizes and should fit any door. If upvc door handles if the new door handle you are buying will work, remove the old one and take measurements of its holes in the housing. This will help you buy the correct sized door handle.
The easiest way to take off your old door handle is to unscrew it from the door itself. This is typically done with the screw driver. Some door handles come with a cover plate which hides the screws used to mount them. It is necessary to remove it to get to the screws. After removing the handle that was previously used, take note of how the spindle has been connected. This will help you align the new handle.
Alternatively, you can remove the door handle by removing it from the latch mechanism. This is usually done with the screwdriver, but you'll need to find the small latch, which should be on the edge of the trim piece. Once you've removed the latch, you can take the handle off the strike plate, and then the latch from the door edge.
The Strike Plate
If you are replacing your handle, you'll also be required to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The package the new handles are packaged in will have two latch plates - either a rectangular or circular (see the diagram above for the components of a door handle). If you have an old rectangular latch plate, swap it with a circular one. This will allow the latch to be able to hook into the strike plate, making the handle easier.
The first step is to remove the screw that's holding the latch plate that was previously in place. The screws are usually quite tight and require a fair amount of force to loosen them. It is helpful to have a second person assist with this part if possible.
After the screws have been removed and the latch plate will slide out of the door with ease. If the latch plate is stuck or won't move, use a small file to scrape the edges. This will sometimes free the plate up.
Now you can prepare the new strike plate to be installed. Attach the latch plate to the door jamb using the screws that were included with the new handles. Be careful not to over-tighten the screws, as this may damage the strike plate.
If you're unsure whether the latch plate is in its correct position, close and open the door to see whether it latches and closes correctly. If not then you'll have to adjust the strike plate either up or down, or move it forward or back, until the door closes and latches correctly.
If the door is moving or jiggling, then you may need to enlarge the latch hole in the strike plate. This is more prevalent for older doors, but could also be caused by wear and tear, hinge mortises that are too narrow or the wrong size for the latch, or due to a broken or damaged strike plate. If this is the case you can use a metal file instead of a chisel or hammer to adjust the strike plate.
Eliminating the Latch
The latch is the metal piece that is angled that is able to move in and out of the hole in the inner edge of your door. When you turn the handle, it pushes the latch forward, allowing you to open the door. It also hooks in the door's frame so that the door is closed. If your door wobbles when you close it, a new latch may be all you need to fix the issue.
It's difficult to identify the screws that secure the latch to the door, but there's usually a small hole on the trim plate that allows you to insert a screwdriver and take it off. After removing the trim plate, you should be able to remove the latch as well as the bolts that hold it and the spindle.
If the latch isn't able to be released you can try using a paper clip or a tool to release it from the handle mechanism. Place the item in the slot for the latch that is recessed. gently turn or jiggle it until you feel the handle and latch begin to separate. You may need repeat this process a few times before you can take the latch off.
You should be able slide the new latch into its slot with no issues once you have removed the old one. Make sure that the latch is correctly positioned in the slot and lined up with the screw chambers and then use your new screws to fasten it to the strike plate and door frame.
Check the backset of the current handle (the distance between the centre of the large hole in the door's front and the edge) prior to installing the new handle. Also, ensure whether the size of the latch on the new handle is a good match to the measurement of your existing handle.
If you are replacing the latch or handle or handle, or if your previous lock cylinder is damaged, then you'll require an entirely new one. If you're not switching locks, a new lock should fit into the recess you have already installed, and also work with your current keys. Be sure to choose a latch with rectangular cover plates that match your old handles.
Take off the cover plate
Door handles can begin to look worn over time If you replace them with a modern lever on rose design it's an easy and quick DIY project to decorate and can improve the overall appearance of your home. You can purchase complete sets that include matching escutcheons as well as privacy adaptor kits.
The first step in replacing the door handle inside is to remove the cover plate or rose, which covers the screws and mechanism inside. Look for an opening tab on the plate, and make use of a flathead screwdriver to remove it from the knob. It may have a slot along one edge or be held in place by a pin.
After the cover plate is off, remove the screw that holds the inside handle in place and put it aside. You'll also need to remove the screws that hold the latch and the plates inside to the door, which you can accomplish by loosening them with the help of a Philips screwdriver. Then, you can remove the outer plates and latch plate from the door and set them aside.
Most doors have gaps between the jamb of the door and the edge of the frame that makes room for a handle, however not all have. If yours does not have a handle, you'll need to make a hole in the door to install the new handle. It's the same procedure as opening a door locked, but you will have to be extra careful not to harm the frame or door.
The installation of new door knob screws is necessary after the holes have been made. Make sure to buy the same size as the old ones, to ensure that you do not end up with an handle that is either too tight or too loose. You'll also have to install the new latch plate and strike rod, which aren't included with most door handle sets.
If you're in search of a reliable replacement for your interior door handle set Try the Amazon's Choice FAERSI two-piece chrome finish handle set. It's a factory-fit and has received a plethora of five-star reviews from delighted customers. It's an excellent option to replace worn or damaged interior door hardware on your Chevy.